You took a smarter decision of buying a range extender. Not
you have to set it up on your own. Don’t worry it’s not a big deal; you can do
it easily if you do it with that same excitement when you bought your brand new
device. Netgear
helpline is done only
when you locate your existing router within the range of your new device (20-30
feet). Then you have to plug both of you devices into a power socket and wait
until the lights turn to solid green. Also keep this point in mind; if your
devices are even slightly heated we would suggest you do not proceed until they
get completely cool.
What does the LEDs on
your devices indicates
Routers:-
·
Green- Most excellent Connection
·
Amber- Excellent Connection
·
Red- Worst Connection
·
Off- No Connection (disable)
Extenders:-
·
Solid Green- High-quality Connection
·
Amber Blue- Fine Connection
·
Solid Red- Deprived Connection
·
Disable- Off
Network LED:-
·
Solid Amber- Good quality Connection
·
Solid Green- Superior Connection
·
No LEDs (Off)- Disable
Main LED (WPS):-
·
Solid Green- WiFi safety is on
·
Blinking Green- In progress
·
Amber- Superior Connection
·
Disable (Off)- No connection
WiFi Sheltered Setup:
Enable Security
·
Connect your range extender and the router with
the help of an Ethernet Cable.
·
Press and hold the WPS button on both the
devices for 20 seconds. Apply this process on one device and in the gap of two
minutes, relate the same process on another.
·
Now, grab your computer and with the help of
another Ethernet cable, connect your range extender with it.
Netgear Genie Setup:
Dealing With Range Extender
Once you have connected your devices with each other. Open a
web browser and log in into the Web Page Netgear
Genie Setup by typing Mywifiext into the address bar.
After that you are supposed to fill the username and password into the below
empty fields. Fill the two by default and proceed further. In case you don’t
have those details, do not panic just seek the advice of an IT executive or you
can also ask your Internet Service Provider to help you out with the same.
Once you got them, just rush and keep stick with the
positive responses appears before you and asking for a single click on it. Do
not redirect or go back until it asks you to click finish. The words finish is related to the biggest success that you
have achieved in the process of your installation.
Things to avoid and
what to follow:
·
After your process of installation comes to an
end, move the extender to its intended place. But avoid interference of range
limit. The difference should not go beyond 30 feet.
·
Keep all your devices updated and set them free
in a cool but dry place.
·
Don’t make use of that adaptor and Ethernet
cable that are in poor condition.
·
Do not enable WiFi when the process of
installation is going on.
·
Turn off all the metal appliances.
Extender texture:
·
Gives up to Gigabits speed without any signal breakage
that follows each and every step of yours at every inch from door front to
backyard.
·
Setup a limit for Parental control as well as
Guest access and avoid your network from hacking.
·
Always keep you updated, when intruder ever
tries to enter in your WiFi range.
·
Easily make a relationship with all your devices
and always make them up and running.
We are here to share our valuable views with the user in
order to get them rid of annoying troubleshooting situation. If you had any
question regarding the same or any. Do let us know in the comment box given
below. We will be fortunate to help you.
No comments:
Post a Comment